The cordless phone
features include
AutoTalk
and
TM
AutoStandby
.
TM
AutoStandby allows you
to hang up by simply
returning the handset
to the base.
[ 14 ]
G E T T I N G S T A R T E D
Setting Menu Display Options
There are five setup options available. They are Caller ID options (AutoTalk, CIDCW
[Caller ID on Call Waiting], Area Code), Dial Mode and Language.
AutoTalk allows you to answer the phone without pressing the talk/flash key.
If the phone rings when AutoTalk is on, simply remove the handset from the base
and the phone automatically answers the call. If the phone rings when AutoTalk
is off, you must press the talk/flash key to answer the call.
Caller ID options
To change your AutoTalk and CIDCW:
1) Press and hold the caller id/menu key. The following screen
appears.
2) Use the vol/ /
or vol/ /
would like to change.
Press the select key to toggle between
3) Press the end key and return the handset to the base unit to complete the
setting. The handset returns to standby mode.
Entering Your Area Code
If you enter a 3-digit area code number in the
code does not appear in Caller ID messages. Do not program this option if your
calling area requires 10-digit dialing. When reviewing Caller ID messages, you will
see only the local seven digit number. For calls received from outside your local area
code, you will see a full 10-digit number.
key to move the pointer to the selection that you
and
.
On
Off
Area Code
option, your local area
www.uniden.com