Table of Contents
Advertisement
SET-UP
REMOTE COMMANDER
1 Turn the Remote Commander face down, press the tab
and lift the cover.
2 Place batteries in the Commander with the polarities in
the correct directions, as illustrated inside the case.
3 Replace the cover.
Notes
e
Use 2 size AA batteries (IEC designation Ré6).
¢
In normal operation, batteries will last up to half a year.
If the set does not operate properly, the batteries might
be exhausted. Replace all with new ones.
¢
To avoid damage from possible battery leakage, remove
the batteries for extended unused periods.
«Be sure that there are no obstructions between the Com-
mander and the TV.
¢
Operable range is limited.
Remote
control
detector
INDOOR ANTENNA
If your local broadcast signals are strong, attach the sup-
plied indoor antenna.
Rear of TV
Fasten with a
screwdriver.
Adjust the length, direction and angle of both elements
symmetrically until the picture is clearest.
If the supplied antenna connector has a slot as illus-
trated below:
fy,
Antenna
ora
Connector
6) |
Shaul
he
D
vertical.
I
( 300 2
)
UHF/VHF
To turn the slot, use a
coin or a similar object.
Advertisement
Table of Contents
