How To Set The Internal Clock; How To Set The Program Start Timer - Sony TRINITRON KV2080R Operating Instructions Manual

HOW TO SET THE INTERNAL CLOCK
Ex. To set the clock to 8:05 PM, follow the steps below.
1 Press TIMER/BLOCK once to change from "normal
page" to "clock page."
"clock page"
ek eiam
"2 Press 0, 8, 0,5, AM/PM (0 necessary).
3 If you have made a mistake, press CLEAR and return
to step 2.
lf you have performed the operation correctly, press
ENTER.
The numbers will "wink" to indicate that the clock has
been set.
(The 0 in front will disappear.)
8:05pm
"AM'/"PM" indication disappears.
To return to 'normal page," press TIMER/BLOCK after the
"AM"'/"PM" indication has disappeared.
Note
12:00 AM stands for midnight.
12:00 PM stands for noon.
12
HOW TO SET THE PROGRAM START TIMER
Make sure that the clock has been set correctly before set-
ting the program start TIMER.
Ex. To set the TIMER for a program which begins at 10:30
PM on channel 12, follow the steps below.
1 Press TIMER/BLOCK once to change from "normal page"
to "clock page."
"clock page"
2 Press TIMER/BLOCK before the "AM"/"PM" indication
disappears and summon "TIMER page."
"TIMER page"
3 Press 1, 0, 3, 0, AM/PM, ENTER.
Numbers will "wink" to indicate that the time has been
set.
10:30pm
=CH.
8:0Sem
4 Press 1, 2, ENTER (0 not necessary).
Numbers will "wink" to indicate that the channel has
been set.
10: 30em
The TIMER indicator will light up to indicate that the
TIMER has been set.
If you have made a mistake, press CLEAR and return to
step 3.