Axis EP200 User Manual page 13

Uniden ep200: operating guide
Table of Contents

Advertisement

Charging the Handset
Place the handset on the base to charge. The Charge message appears on
the LCD. See page 17 for details.
Note:
The handset must be fully charged before the phone will operate
properly. The battery included with your phone is not charged.
Allow 12 to 15 hours for the Handset to charge.
During this time you can use the speaker phone to make calls.
Battery Memory Effect
Rechargeable batteries can develop a "memory" (reduced charge capacity)
caused by repeated charge and discharge cycles. The battery life will seem to
be shorter over time as you use the unit.
To Avoid Memory Effect
At least once a month, operate the unit until the "Battery Low" indicator appears.
Avoid "topping off" the charge after using the phone for a short time. Also, do not
charge the Rechargeable Battery for extended periods of time.
Low Battery Indicator
When the Battery Pack in the Handset is low and needs to be charged, the
talk/batt low LED flashes every 3 seconds.
If this occurs while you are on the phone, you hear an alert tone. Complete
your call as quickly as possible, and return the Handset to the Base Unit for
charging.
Allow 12 to 15 hours without any interruption for the Handset to fully
recharge.
talk
batt
talk
chan
3
1
2
def
abc
Getting Started
13

Advertisement

Table of Contents
loading

Table of Contents