Table of Contents
Advertisement
Quick Links
Important Safety Instructions
This product has been designed to assure your personal safety. Improper use
can result in potential electrical shock or fire hazards. Carefully observe and
comply with all warnings, cautions, and instructions placed on the product, or
described in this operating guide.
WARNING! — When using your telephone equipment, these basic safety
precautions should always be followed to reduce the risk of fire, electrical shock,
and injury to persons:
Instructions — Read, understand, and retain all instructions.
Warnings — Follow all warnings and instructions marked on the product.
Cleaning — Unplug this product from the wall outlet before cleaning, and use a
dry cloth, without liquid or aerosol cleaners.
Water and Moisture — Do not use this product near water; for example, near a
bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a
swimming pool.
Placement — Do not place this product on an unstable cart, stand, or table. The
telephone may fall, causing serious damage to the unit.
Ventilation — Slots and openings in the cabinet and the back or bottom are
provided for ventilation. To protect the product from overheating, these openings
must not be blocked or covered. This product should never be placed near or
over a radiator or heat register. This product should not be placed in a built-in
installation unless proper ventilation is provided.
1
Advertisement
Table of Contents
Related Manuals for Axis EP200
Summary of Contents for Axis EP200
-
Page 1: Important Safety Instructions
WARNING! — When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: Instructions —... - Page 2 E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinct change in performance. Hazards — Do not use the telephone to report a gas leak in the vicinity of the leak.
- Page 3 Important Safety Instructions Privacy — Cordless telephones are radio devices. Communications between the handset and base of your cordless telephone are accomplished by means of radio waves which are broadcast over the open airways. Because of the inherent physical properties of radio waves, your communications can be received by radio receiving devices other than your own telephone unit.
-
Page 4: Battery Safety Precautions
Battery Safety Precautions To reduce the risk of fire or injury to persons by the battery, read and follow these instructions: Recommended Battery — Use only the appropriate type and size Battery Pack specified in this Operating Guide. Battery Disposal — Do not dispose of the Battery Pack in a fire. The cell may explode. -
Page 5: Introduction
Internet is a huge repository of information, provided by countless millions of people, and covering every subject imaginable. Your new EP200 allows you to tap into one of the most useful aspects of the Internet. Electronic Mail, or E-Mail for short, is a tool for sending letters and messages to people all over the world via the Internet. -
Page 7: Getting Started
Getting Started Unpack Your Phone Remove all the components from the box. Check the Contents Your Axis EP200 phone should contain the following items. If any of these items are missing, please contact your place of purchase. Base Unit Handset... -
Page 8: Preparing The Phone For Use
Preparing the Phone for Use Connect the Power Plug one end of the AC Adapter into the DC 13V In jack on the back of your EP200 Axis phone Wrap the power cord around the strain relief notch in the base. LINE... - Page 9 3. Plug the other end of the AC Adapter into your wall outlet. Connecting the Phone Line 1. Plug one end of the telephone cord into the Line Jack on the back of your Axis EP200 phone. LINE DC 13V IN...
- Page 10 Installing Additional Equipment You can install additional equipment, such as an answering machine or messaging system, by connecting it to the TEL Jack on the back of your EP200 Axis phone. Plug the other end of the telephone cord into your wall jack.
-
Page 11: Final Touches
Final Touches Raise the Antenna Raise the antenna to the vertical position. Installing the Handset Battery Pack 1. Press in on the Battery Cover Release and slide the battery compartment cover down. Getting Started... - Page 12 Getting Started Note: Note: Align the plastic connector of the Nickel-Cadmium battery pack with its socket and plug it in. The black lead will be on the left when the plug is properly aligned. Place the battery pack inside the battery compartment, and slide the battery cover back on.
- Page 13 Charging the Handset Place the handset on the base to charge. The Charge message appears on the LCD. See page 17 for details. Note: The handset must be fully charged before the phone will operate properly. The battery included with your phone is not charged. Allow 12 to 15 hours for the Handset to charge.
- Page 14 Getting Started Cleaning the Battery Contacts Adjust the LCD Contrast To maintain a good charge, it is important to clean all battery contacts on the Handset and Base Unit about once a month. Use a pencil eraser or other contact cleaner. Do not use any liquids or solvents. talk batt talk...
-
Page 15: Initial Power Up
3. The LCD is properly adjusted when you can comfortably read the screen. Initial Power Up When you first turn on the EP200, a diagnostic is performed. During the diagnostic, which lasts around 15 seconds, the screen will be blank. -
Page 17: Setup
The Home screen can be reached at any time by pressing the Function Key under the Note: The LCD display could look different depending on the software in your EP200 Axis phone. Calendar Ù Ú Ù Ú Use < >... -
Page 18: Ep200 Functional Areas
Setup EP200 Functional Areas Your EP200 Axis phone is divided into several functional areas. These are: Arrow and Select Keys These keys are used to move the cursor on the screen, or to select a message. The Arrow and Select Keys... -
Page 19: Function Keys
Function Keys The Function Keys are associated with the icons on the LCD screen directly above them. To select an operation represented by an icon on the LCD screen, press the Function Key below the icon. Calendar 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30... - Page 20 Setup The Base Unit Keypad The base unit keypad can be used to dial phone numbers when using the speaker option. The Keyboard Use the keyboard to type e-mail messages and notes.
-
Page 21: Setup Screen
EP200 Axis phone. Setting up the Phone This section explains how to set up the phone features of your EP200 Axis phone. The features include setting the Speaker volume, entering your local area code and prefix, turning off the LCD screen, and paging the Handset. - Page 22 1. Press the Function Key under 2. Press the Function Key under Exiting Phone Setup The LCD backlight automatically turns off after ten minutes if you are not using the EP200. To exit the Phone Setup Screen, press the Function Key under...
-
Page 23: Establishing E-Mail Service
Setup Establishing E-Mail Service This section explains how to set up the E-Mail features of your EP200 Axis phone. The features include Automatic sign-up, selecting polling times, and setting up an existing Internet provider. Entering the E-Mail Setup Screen The E-Mail setup screen is accessed from the Home screen. - Page 24 To cancel any time, press the Function Key under You must fill in the personal data section in order for your EP200 Axis phone to operate properly when using the automatic sign-up feature.
- Page 25 Enter Your Credit Card Information 1. Enter your credit card name. For Example, John Smith. 2. Press on the keyboard. 3. Enter your credit card type (AMEX, MASTER CARD, VISA). 4. Press on the keyboard. 5. Enter your credit card number. For example, 12345678901. 6.
- Page 26 Setup Setting Up E-Mail Retrieval Times Use this feature to set up the times you want your EP200 Axis phone to automatically dial the Internet and retrieve your E-Mail. Note: 1. Press the Function Key under 2. Press the Function Key under 3.
- Page 27 28. The Dial-up Script is a set of commands that will tell the modem in the EP200 how to dial and login to your service provider. Before you start this procedure, be sure to have the following information ready:...
- Page 28 20. To cancel press the Function Key under Entering a Dial-up Script The Dial-up Script is a set of commands that tell the modem in your EP200 what to do. Below are examples of Dial-up Scripts that should work for most services.
- Page 29 Default Dial-up Script: This dial-up script is provided as the default with your EP200 Axis phone. It has been tested with Flashnet, Internet America, Netcom, and GTENet. dial wait 20 CONNECT send + wait 20 ogin: send $ISPUSER wait 20 word:...
-
Page 30: More Setup Screens
Setup Entering Advanced Setup Information Note: 1. Press the Function Key under 2. Press the Function Key under 3. Press the Function Key under 4. Press the Function Key under 5. If your service provider requires PAP or CHAP authentication, use 6. - Page 31 16. Use to select daylight savings time. Selecting yes will enable your Axis EP200 to automatically sense the change to Daylight Savings Time. 17. Press the Function Key under 18. To cancel, press the Function Key under...
- Page 32 4. Press the Function Key under 5. Repeat for other dates. 6. Press the Function Key under Restarting the System You can restart the Axis EP200 phone anytime by pressing SHIFT + TAB + DEL at the same time. : < >...
-
Page 33: Home
Note: The LCD display could look different depending on the software version in your EP200 Axis phone. Entering notes You can store up to eight lines of notes for each date on the calendar. Each line contains 23 characters. The calendar changes each day and the notes for that day are automatically displayed. -
Page 34: Modifying Notes
Home 8. Press the Function Key under Modifying notes 1. Press 2. Press 3. Press 4. Press the del key to backspace and erase text. 5. Press the return key. 6. Repeat for multiple notes 7. Press the Function Key under Viewing notes 1. -
Page 35: E-Mail
The LCD display could look different depending on the software in your EP200 Axis phone. Reading Messages Note: The EP200 does not accept attachments to files. Only plain text will be retrieved and displayed. 1. Press to highlight a message to read. -
Page 36: Receiving Messages
Receiving Messages You can configure your Axis phone to automatically receive messages at certain times during the day. See E-Mail Setting Up Polling Times on page 26 for details. To manually receive your E-Mail messages: 1. Press the Function Key under 2. -
Page 37: Delete Messages
8. Press the Function Key under Note: Do not touch the keyboard until the EP200 is finished sending the message. Wait until the screen displays “Messages Sent” before continuing with operations. — OR — Press the Function Key under and no message will be sent. -
Page 38: Forwarding Messages
Do not attempt to forward extremely long E-mail messages. Long messages can fill up the EP200’s memory and cause improper operation. — OR — Press the Function Key under to select recipient. -
Page 39: Address Book
A typical Address Book screen is displayed below. Note: The LCD display could look different depending on the software version in your EP200 Axis phone. Viewing Addresses 1. Press the Function Key under Note: The address book will display the message “Please wait while... -
Page 40: Modifying Addresses
Modifying Addresses 1. Press the Function Key under 2. Press 3. Press the Function Key under 4. Press Note: 5. Type in the changes. 6. Press the Function Key under 7. Press Deleting Addresses 1. Press the Function Key under 2. -
Page 41: Entering New Addresses
Entering New Addresses 1. Press the Function Key under 2. Press the function Key under 3. Press on the keyboard, or use to modify. 4. Type in the changes. Press del on the keyboard to backspace over a mistake. 5. Press the Function Key under 6. -
Page 43: Caller Id
D A typical Caller ID screen is displayed below. Note: The LCD display could look different depending on the software version in your EP200 Axis phone. Call I.D. Ù Ú Ù Ú UNIDEN CORP... -
Page 44: Viewing Caller Information
Viewing Caller Information 1. Press the Function Key under 2. Press 3. Press the Function Key under Deleting Caller Information 1. Press the Function Key under 2. Press 3. Press the Function Key under 4. Press the Function Key under Adding Caller ID Information to the Address Book 1. -
Page 45: Using Your Phone
Press the speaker key on the base unit. Note: If your Axis EP200 phone was in the process of sending or receiving E-mail, you may not get a dial tone for approximately five seconds while the line is cleared. Any E-mail send or receive in progress... -
Page 46: Storing Memory Numbers
Storing Memory Numbers Up to 10 numbers can be stored in the Handset for speed dialing when you are away from the base. Numbers cannot be stored in the Base unit. Note: 1. Pick up the Handset and press mem . You will hear a beep and the 2. -
Page 47: Redialing The Last Number Called
During the course of a conversation if you hear static or noise causing difficulty in hearing the other party, change channels by: 1. Pressing the channel key on the Handset. 2. The talk/batt low LED on the Handset will flash, indicating the EP200 is finding the best channel available. -
Page 48: Changing The Handset Ring Type And Ring Volume
Changing the Handset Ring Type and Ring Volume There are 2 ring types and two ring volumes that can be selected while your EP200 is in the Standby mode. Be sure the talk/batt low LED is not lit on your EP200 Handset. -
Page 49: Product Specifications
10 to 40 C Storage Temperature: -40 to 100 C Humidity: Up to 90% relative, without condensation Power Requirements Voltage: 90-130 volts AC, 55-65 Hz Cordless Telephone Specifications General Frequency Control Phase Locked Loop Modulation Operating Temperature -10° - 50° C Base Unit Transmit Frequency: 926.000 ~ 927.950 MHz (40 Channels) - Page 51 PRECAUTIONS Before you read anything else, please observe the following: WARNING! — Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.
-
Page 52: Controls And Indicators
Controls and Indicators Handset Talk Key talk Numeric Keypad Tone/* Memory Key mem Flash Key flash Talk/Battery Low LED Channel Key chan Pound Key Volume/Ringer Control volume/ringer Redial/Pause Key redial/pause... - Page 53 Controls and Indicators Base LCD Screen Function Keys Numeric Keypad Qwerty Keyboard Charging Cradle LCD Contrast Speaker Button Speaker Volume Control Control Keys Speaker Microphone...
-
Page 54: Table Of Contents
EP200 Functional Areas ........ - Page 55 Cordless Telephone Specifications ........49...
- Page 56 Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the Operating Guide for this product.
- Page 57 Covered under one or more of the following U.S. patents: 4,511,761 4,523,058 4,595,795 4,597,916 4,803,491 5,157,686 5,253,268 5,381,460 5,434,905 ® ©1997 Uniden America Corporation All Rights Reserved Printed in the Philippines...