Yamaha YPP-35 Owner's Manual page 6

2. PLAYING
A. Basic Playing Operation
1) Power
When all the necessary connections have
been made, turn on the POWER switch (1).
The Reverb and Song 1 Indicators will light
up.
2) Volume
Adjust the volume with the VOLUME slider
(2). This slider controls the speakers' and
headphones' volume, as well as the output
level of the AUX. OUT jacks.
3) Selecting Voices
Selectthe sound you wishto play by pressing
one of the 8 Voice Select buttons (3).
* When the YPP-35 is first turned on, PIANO 1
is automatically selected.
4) Playing
Normally you can play up to 16 notes si-
multaneously except for PIANO 2 and
HARPSICHORD, Which can be played up
to 32 notes at a time.
* Thetone of some voices may change slightly
at one or more points on the Keyboard. THis
is due to the way in which the voice waveforms
were intially sampled and is normal.
5) Ensemble
To get a richer, thicker sound, press the
ENSEMBLE button (4), and the Indicator
above the button will light up. To turn off the
effect, press the button once again.
* When the Ensemble effect is on, only 16
notes can be played simultaneously, re-
gardless of the selected voice.
6) Reverberation
When the YPP-35 is turned on, the Reverb
effect is automatically turned on, as youcan
see by the light above the REVERB button
(5). This effect makes the instrument sound
like itis played in a concert hall. If you wish
to turn off the Reverb, press the REVERB
button again. To turn the effect back on,
press this button once again.