Advertisement
We want to thank you for selecting the SL-1800, Direct Drive Turntable System.
For optimum performance, we recommend that you read these instructions caretully.
Parts identification
=
Output terminals
—————_—
Turntable mat
Turntable pl
Motor shaft
(Centre spindle)
Strobe dots
Strobe mark
Strobe
iluminator?
pilot lamp
Speed selector
eS
Head shett
Pitch control knobs:
Turntable base
Assembly and set-up w
Caution:
Never connect the AC power plug belore the assembly has
been completed
Attach the dust cover last. so that assembly of other parts
and adjustments can be made efficiently,
Turntable unit,
45 r.p.m. adaptor
1
1
Turntable platter
1 Special oil
Turntable mat
1 Balance weight
1
Dust cover
1 Head shell
Overhang gauge
1
@Remove the transport spacers.
spacers for transportation (located at lelt-hang
front corner, right-hand rear corner, and then the tonearm
base), and the tape fastening the tonearm. (See Figs. 2 and 3),
"Warning: To prevent fire or shock hazard,
do not expose this appliance to rain or moisture."
1
Advertisement
