Digital Inputs; Digital Output - Intab PC-Logger 2100 User Manual

4.2

Digital Inputs

The status of the three digital inputs are reflected in channel 31. By monitoring
these along other signals you can make sure that valves or switches assume the
right status at the correct time and correlate this with other measured parameters.
These inputs must be externally "debounced" if mechanical switches are used as
"sensors" or fitted with filters if the electrical environment is noisy.
4.3

Digital Output

The digital output is mainly used as an alarm output.
It may also be used for switching purposes, e.g. switching power to external
equipment.
The EasyView Pro software supports alarm programming.
Page 20
INTAB Interface-Teknik AB, Sweden