Advertisement
QL-5
Tonearm
Section
Adjustment
replacing a cartridge or a headshell.
8-(5) Arm Lifter Height Adjustment
Fit the overhang indicator onto the turntable spindle with
the arrow-shaped
end pointing toward
the tonearm pivot.
Move the tonearm and place the stylus over the overhang
indicator. (Be sure, the tonearm is in the up position.) One
digit on the overhang indicator represents 1 mm overhang.
Slide the cartridge adjusting the overhang until the stylus
points to 15 mm
(marked by "4" between 10 and 20 mm).
Be sure to secure the cartridge to the headshell after the
adjustment. Errors within 2 — 3 mm are negligible from the
practical point of view.
No. 2428
Lifter bracket securing screw
\
Tonearm securing screws
(2 lock screws)
Fig. 16
Overhang indicator
90
ef
Disc surface
SS
Fig. 17
Lock screws
Fig. 18
Advertisement
