Advertisement
@
The platter makes a noisy stop.
@ The platter does not stop correctly due to a defective
Fig. 13
brake. (The platter does not stop within one rotation.)
If the platter contacts the brake lining during rotation,
turn the boss counterclockwise to increase the clearance
between
the brake
lining and
platter.
After
replacing
the brake rod, be sure to apply a drop of silicone (in the
order of million unit) to the part of the motor board
stud which contacts the brake rod.
Fig. 15
QL-5
=10i=
No. 2428
Advertisement
