Panasonic SL-SX418 Operating Instructions Manual

p
EB GN GC
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/

Troubleshooting guide

Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem,
consult your dealer for instructions.
≥The HOLD function is on ( page 4).
≥The disc isn't correctly set.
≥The disc is scratched or dirty.(Tracks skipped.)
≥There is moisture on the lens. Wait for about an hour and
No play.
then try again.
≥The lens is dirty: clean it with a blower (recommended
product: SZZP1038C).If the lens gets marked with
fingerprints, gently wipe them off with a cotton swab.
≥The unit may not read WMA/MP3 correctly if it is shaken
while it is reading the files.
≥You may not be able to play WMA/MP3 if you have copied a
Cannot play WMA/
multi-session disc that has no data between sessions.
MP3.
≥You may not be able to play a WMA disc if it contains large
files, such as JPEG.
≥You cannot play a WMA disc if the copy protection setting
was on when you made the disc.
≥Ensure the plugs are inserted firmly.
≥Wipe the plugs clean with a clean cloth.
No sound or there is a
≥Noise may occur when playing WMA/MP3 if recording quality
lot of noise.
is poor.
≥The elapsed playing time disappears and sound is interrupted
if bumps continue repeatedly.
Play doesn't resume
≥This doesn't work if you change discs.
from the track where
≥This doesn't work during random play.
play stopped at. ≥It may not work correctly under some conditions.
≥Random play modes may be on ( page 6).
Play doesn't start
≥Play resumes from the track where you last stopped play. Use
from the first track.
skip to return to the first track.
The unit stops
Disconnect then reconnect all power sources (batteries and AC
working.
adaptor).
Cannot search
You cannot search through WMA/MP3 files.
through tracks.
Cannot skip albums.
You cannot skip between the first and last albums during play.
≥References to WMA apply only to SL-SX425.
≥References to the remote control apply only to SL-SX425 and SL-SX420.
Cannot hear the
remote control's
operation tone.
SL-SX425
The unit malfunctions
when connected to
other equipment.
The remote control
malfunctions.
Cannot recharge.
The AC adaptor becomes
warm during recharging.
The batteries are taking
a long time to recharge.
Play time is very short
even after recharging.
Play time is short
after recharging.
The battery indicator
fails to appear or is
incorrect.
1
SL-SX425
SL-SX420
SL-SX419C
SL-SX418
Portable CD player

Operating Instructions

Dear Customer
Thank you for purchasing this product.
Before connecting, operating or adjusting
this product, please read these instructions
completely. Please save this manual for
future reference.
Note:
≥"EB" on the packaging indicates the
United Kingdom.
≥SL-SX419C and SL-SX418 models are not
designed for use with remote control.
The operation tone may be off ( page 6).
SL-SX420
Be sure to connect other equipment through the remote
control. Speakers connected directly to the unit should have an
impedance of 1 k≠ or less.
Use only the included remote control to operate this unit.
≥You aren't using the special rechargeable batteries ( page 5).
≥You must insert two batteries before you can recharge them.
≥The unit must be off before you can recharge.
This is normal.
The batteries may take a maximum of 6 hours to recharge
under some conditions.
The batteries may have reached the end of their service life.
Usually they can be recharged 300 times.
≥This may occur after the first time you recharge the batteries
or after you haven't used them for a long time. Play time
should be restored after a few recharges.
≥The batteries can go flat if you leave the AC adaptor
connected after recharging is complete.
≥The indicator does not appear when the AC adaptor is connected.
≥The indicator does not appear correctly under some other
conditions.
RQT7028-B
F0203KK0