Advertisement
Video Settings
Resolution
Loop
Microphone
Stamp
13. Swipe down to exit the Video Settings page.
14. Power off the camera by long pressing the Power/Mode button.
15. Install the SD card in the camera.
16. Test the camera:
a. Power on the camera by long pressing the Power/Mode button.
b. After powering on the camera should automatically start to record.
c. Stop the recoding the long pressing the Power/Mode button. The camera should turn off.
17. Refit the camera in the frame and refit the camera retaining screw with a 4mm hex key.
Set up the video settings
https://knowledge.faro.com/Hardware/GeoSlam/ZEB_Accessories/ZEB_CAM_for_REVO_GitUp_G3_Camera_reset
Page
1
1
4
4
Changes to Default
1440P4:3
OFF
OFF
OFF
Updated: Wed, 11 Oct 2023 07:39:01 GMT
4
Advertisement
