Advertisement
3. Remove the SD card from the camera.
4. Power on the camera by pressing the Power/Mode button on the front of the camera.
5. Ensure the camera is set to video mode. Short press the Power/Mode button on the front of the camera to cycle
between Video mode, Camera mode and Pre-view mode.
6. Enter the Camera settings by touching the Camera Settings icon on the touch screen.
7. Swipe left to page 4 of the camera settings.
https://knowledge.faro.com/Hardware/GeoSlam/ZEB_Accessories/ZEB_CAM_for_REVO_GitUp_G3_Camera_reset
Updated: Wed, 11 Oct 2023 07:39:01 GMT
2
Advertisement
