Table of Contents
Advertisement
2. Remove the 2.5-inch primary storage drive from the storage converter.
3. Install the 2.5-inch primary storage drive to the storage converter.
4. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
2.5-inch secondary storage drive
1. Remove the computer cover. See "Computer cover" on page 45.
2. Remove the front bezel. See "Front bezel" on page 46.
3. Remove the optical drive. See "Optical drive" on page 47.
4. Remove the drive bay assembly. See "Drive bay assembly" on page 50.
5. Disconnect the signal cable and the power cable from the 2.5-inch secondary storage drive on the
bottom of the drive bay assembly.
54
P340 User Guide
Advertisement
Table of Contents
