LG LT18S2100 Series Owner's Manual page 18

en-us_main.book.book Page 18 Monday, December 18, 2023 1:46 PM
18 INSTALLATION
NOTE
• The flat screw must be placed on the exterior
side of the hinge.
• Disassemble the leveler before moving the
bottom hinge bracket.
2
To move the leveler
a
the front of the refrigerator. Remove the
leveler by turning it clockwise and attach it to
the opposite side by turning it
counterclockwise.
NOTE
• The leveler is only present on some models.
3
Move the decorative screws to the holes on
the bottom right side of the housing.
4
Turn the refrigerator door upside down on a
non-scratching surface.
5
Loosen the three screws to remove the
bracket and the hinge pin sleeve
b
to the opposite side, lift
.
c
6
Move the bracket to the opposite side of the
door and insert the hinge pin sleeve. Reverse
the hinge lever by flipping it over. Place it
d
on top of the bracket, and tighten both down
with the screw. Then insert the remaining 2
screws to tighten the bracket to the
refrigerator door.
NOTE
• The hinge lever is only present on some models.
7
With a flat-head screwdriver, carefully pry off
and remove the decorative cover
screw holes on the left side of the refrigerator
housing.
8
Flip the middle hinge bracket
will now be on top.) Position it on the left
g
side of the refrigerator and reattach it with
two bolts and a Phillips-head screw.
over the
e
. (The flange
f