Show Ruler; Tips Help; Scan Destination; File - UMAX Technologies Astra MX3 Owner's Manual

Click on the MagicMatch checkbox (so a checkmark appears) to open the
Profile List.
Note: The MagicMatch checkbox option is available only in advanced mode.
A profile contains calibration data for a specific printer, which MagicMatch
uses to render a final output image. If a printer or calibration profile is not
chosen, MagicMatch will calibrate the image to optimize its display on a
monitor.
MagicMatch only functions when you are scanning in color mode. When you
are using Magic Match, it automatically disables the Level/Curve and Color
Adjustment/Balance settings in the VistaScan Advanced window.

Show Ruler

The Show Ruler command displays or hides the rulers that border the top and
left sides of the Preview window. These rulers correspond to the rulers on your
scanner's object glass. Clicking on the Show Ruler checkbox turns off
(removes the checkmark) and hides the ruler. Clicking on the checkbox again
turns the feature on (displays a checkmark) and shows the ruler.

Tips Help

The Tips Help option determines whether tips are displayed when you pause
with your cursor over a VistaScan option. Click on the Tips Help box to
enable tips (displays a checkmark). When a checkmark appears, clicking the
checkbox disables the tips and removes the checkmark.

Scan Destination

The options in this Preferences tab specify how scanned images are stored,
printed, faxed, transferred to another application, or transmitted via e-mail.
Note: The Scan Destination tab is only available when VistaScan is opened as
a stand-alone application.

File

To designate the file type of a scanned image and create a place to store
scanned images:
1. Click on the File icon. The file preferences appear to the right of the Scan
To icon.
UMAX Astra MX3 Owner's Guide
17