UMAX Technologies Astra 2400S Operation Manual page 14

B. Initiating VistaScan directly
1. Launch the "UMAX VistaScan DA 3.x" program group.
2. The VistaScan interface will appear as shown on page 15.
3. From the "Scan to" panel in the main menu, choose a destination for the scanned image.
4. Click one of the small icons in the "Scan To" panel representing the desired destination (a file,
printer, email application, etc.) for the scanned image. For example, if you want to save the image in a
particular file, press the small icon
button on the top right of the VistaScan interface. The Preferences dialog box will appear.
5. Enter the relevant details into the "File Name" field.
6. Click "OK". The entries you made will be implemented and the dialog box exited.
7. From the four modes on the "Click to Scan" panel, click a scan mode button that best suits the
required scan. For example, if you wish to scan a color photograph, click the Color Photo button in order
for the image to be scanned in true color. Scanning will commence upon selection of a button.
8. For an explanation of the other "Scan to" destinations, please refer to VistaScan's online help. For
instructions on accessing the VistaScan online help, please see page 13.
on the middle of panel, and then press the "Preferences"
14