Kenwood TM-631A Instruction Manual page 12

Display panel = The MAIN band
indicators , The SUB band indicators
® 9® 69 @|@®
|
= 4 ineagber| wale
Fy 8. sags g. 8. ces 5! EEECELD
be g ca teemegeenealtL
TASC. | MUTE
rv + +
The MAIN band Indicators
Flashes when scanning
Displays the operating frequency to
the nearest kHz, the frequency step,
and/or the tone frequency.
—This level meter indicates the relative
receive input signal strength or trans-
mitter RF output.
ON whenever the squelch is open.
ON during transmit.
Fr ON whenever the F key is depressed.
* fa) jc
(Always displays the last Memory
Channel number that had been
selected.)
Displays the current Memory Channel
number.
The * indicator is ON when the
Memory channel will be skipped dur-
ing Memory Channel Scan.
ON when the CALL channel is ON.
+ Displays the selected transmitter off-
- set direction.
(TM-731E)
active.
2G ® 68 ©
Common indicator
< CTCSS »
With the TSU-6; ON
when
the
{ t CTCSS function is active.
Displays the selected CTCSS band.
© asc.
ON when the A.B.C. (Automatic Band
The SUB band indicators
Flashes when scanning.
o~ andibwiea relative signal strenght dur-
ing reception.
Displays the current Memory Channel
number.
«ff
Memory channel will be skipped dur-
ing Memory Channel Scan.
Change) function is ON.
Displays the receive frequency.
bo 52 on whenever the squelch is ON.
The * indicator is ON when the
is reduced.