Flashing Text Start Feature; Flashing Text Stop Feature; Clear To End Of Line Feature; Clear To End Of Display Feature - UTC RETAIL PD1200 Programming Manual

11393104 Rev G

Flashing Text Start Feature

Flashing Text Start
After receipt of this command, all subsequent data received will flash, until a <GS>
command is received. Flashing will be terminated with the flashing text stop
command.
USB Note: The USB PD1200 only supports flashing of the entire screen.
Sending the <FS> command will cause the entire screen to flash.

Flashing Text Stop Feature

Flashing Text Stop
After receipt of this command, the characters following will not flash.
USB Note: The USB PD1200 only supports flashing of the entire screen.
Sending the <GS> command will cause the entire screen to stop flashing.

Clear to End of Line Feature

Clear to End of Line
This command will clear out the display from the current write-in position to the
end of the current line. The current write-in position will not change.
USB Note:

Clear to End of Display Feature

Clear to End of Display
This command will clear out the display from the current write-in position to the
end of the second line. The current write-in position will not change.
USB Note:

Home and Clear Display Feature

Home and Clear Display
This command will clear the display and move the write-in position to the first
position of the first row.
12
<FS>
<GS>
<CAN>
This command is not supported on the USB PD1200
<EM>
This command is not supported on the USB PD1200
<RS>
PD1200 Pole Display Programming Guide
28 DEC 1C HEX
29 DEC 1D HEX
24 DEC 18 HEX
25 DEC 19 HEX
30 DEC 1E HEX
UTC RETAIL