Download Print this page

UTC RETAIL PD1200 Installation Manual

Pole display

Hide thumbs Also See for PD1200:

Download this manual See also: Programming Manual

Congratulations on your purchase of UTC RETAIL's innovative PD1200 Pole Display! Designed to suit

virtually any POS environment, the PD1200 Pole Display is as user-friendly as it is customer-friendly.

The display features selectable baud rates, 360° po le rotation and 20° tilt.

The PD1200 Pole Display provides standard serial interfaces, a 2 line by 20 character vacuum

fluorescent display, and four programmable display intensities.

This guide is designed to help you efficiently assemble UTC RETAIL's PD1200 Pole Display.

You will find the following components inside the PD1200 Pole Display Box:

VFD display and pole with attached cables

Hat bracket (optional)

Base Plate (optional)

Wall transformer (optional)

Note: Go to

www.utcretail.com

Display.

UTC RETAIL

PD1200 POLE DISPLAY

Installation Guide

to access the complete User's Guide for the PD1200 Pole

Page 1: Installation Guide
Congratulations on your purchase of UTC RETAIL’s innovative PD1200 Pole Display! Designed to suit virtually any POS environment, the PD1200 Pole Display is as user-friendly as it is customer-friendly. The display features selectable baud rates, 360° po le rotation and 20° tilt.
Page 2 For USB controlled Customer Displays the Software Driver must be installed in order to operate the unit. Go to http://www.utcretail.com/ You have completed the installation of Ultimate Technology’s PD1200 Pole Display. If you experience problems with any of the components of the PD1200 Pole Display, see the “Troubleshooting Procedures” section below. Troubleshooting Procedures The following table presents symptoms and solutions for problems potentially encountered when installing the PD1200 Pole Display.