Display Position Feature; Normal Display Mode Feature; Vertical Scroll Mode Feature; Reset Feature - UTC RETAIL PD1200 Programming Manual

Display Position Feature

Display Position
After writing the <DLE> character to the display, enter a position byte from the
following Character Position Chart (HEX):
USB Note: Both bytes of the command must be sent in one write to the port,
splitting the bytes between writes will not work.
ROW
1 00 01 02 03
2 14 15 16 17

Normal Display Mode Feature

Normal Display Mode <DC1> Tab Over
After writing a character, the write-in is shifted automatically to the right one
position. When the write-in is in the last position of the first row, the write-in moves
to the first position of the second row. When the write-in is in the last position of
the second row, the write-in moves to the first position of the first row.

Vertical Scroll Mode Feature

Vertical Scroll Mode
After writing the characters up to the last position of the second row, all characters
displayed in the second row are shifted to the upper row (first row), clearing the
second row.

Reset Feature

Reset
All characters displayed are erased, and the write-in position (cursor position) is
set in the first position of the first row. The display mode returns to the power-on
default set-up.
UTC RETAIL
<DLE> Tab Over
04 05 06 07 08
18 19 1A 1B 1C
<DC2> Tab Over
<US> 31 DEC
PD1200 Pole Display Programming Guide
16 DEC 10 HEX
09 0A 0B 0C 0D
1D 1E 1F 20 21
17 DEC
18 DEC
1F HEX
0E 0F 10 11 12
22 23 24 25 26
11 HEX
12 HEX
11
13
27