Inserting Remote Control Batteries
The remote control is powered by two 1.5v "AAA" batteries.
To insert batteries into the remote control:
1. Remove the cover on the rear of the remote control.
2. Insert two "AAA" batteries, ensuring the "+" symbol on the battery matches the
"+" on the battery post.
3. Replace the cover by aligning it with the slot on the remote control and snapping
the latch shut.
WARNING: There is a risk of explosion if batteries are installed with incorrect
polarity.
NOTE:
•
It is recommended that you do not mix battery types.
•
Avoid exposure to heat or steam.
•
Do not allow water or other liquids to splash on the remote control. If the
remote control becomes wet, wipe it dry immediately.
•
Always dispose of old batteries in an environmentally friendly way. Contact
your local government for more information on how to dispose of batteries
safely.
(1)
(2)
12
(3)