Before You Call - Frigidaire FHWW104WD1 Use & Care Manual

18

BEFORE YOU CALL

Before calling for service, review this list. It may save you time and expense. This list
includes common occurrences that are not the result of defective workmanship or materials
in this appliance.
OCCURRENCE
Air conditioner will
not operate.
Air from unit does not
feel cold enough.
Air conditioner
cooling, but room is
too warm - ice
forming on cooling
coil behind
decorative front
Air conditioner
cooling, but room is
too warm - NO ice
forming on cooling
coil behind
decorative front.
Air conditioner turns
on and off rapidly.
SOLUTION
type or reset circuit breaker.
temperature rises above 60°F (16°C).
Straighten away from coil.
and listen for compressor to restart when set in the COOL mode.
mode.
Dust filter may be dirty. Clean filter. Refer to Care and Cleaning section. To
defrost, set to FAN ONLY mode.
PureAir TM filter(sold separately) may be dirty. Replace with new filter. Refer
to Care and Cleaning section. To defrost, set to FAN ONLY mode.
FAN ONLY mode. Then, set temperature to a higher setting.
Dirty Dust filter - air restricted. Clean filters. Refer to Care and Cleaning
section.
TM
PureAir filter(sold separately) may be dirty. Replace with new filter. Refer
to Care and Cleaning section. To defrost, set to FAN ONLY mode.
distribution.
distribution. Clear blockage in front of unit.
windows, registers, etc.
"stored heat" from walls, ceiling, floor and furniture.
Dirty Dust filter - air restricted. Clean filters. Refer to Care and Cleaning
section.
TM
PureAir filter(sold separately) may be dirty. Replace with new filter. Refer
to Care and Cleaning section. To defrost, set to FAN ONLY mode.
bring air through cooling coils more frequently.