Table of Contents
Advertisement
DP 1.2
Press
To use the DP MST (Daisy Chain) or HBR2 feature, enable
DP 1.2.
NOTE: Ensure your Graphics Card can support these
features before selecting DP 1.2. Wrong setting may result
in blank screen. Some Graphics Cards do not support
MCCS (Monitor Control Command Set) at DP 1.2. In these
cases, DDM (Dell Display Manager) may not run.
Reset Display
Select this option to restore default display settings.
Settings
Energy
Power Button
Allows you to set the power LED indicator On During
LED
Active or Off During Active to save energy.
USB
Allows you to enable or disable USB function during
monitor standby mode.
NOTE: USB on/off under standby mode is only available
when the USB upstream cable is unplugged. This option
will be greyed out when the USB upstream cable plugs in.
Reset Energy
Select this option to restore default Energy Settings.
Settings
to enable or disable DP 1.2.
Dell U2715H
Brightness / Contrast
Power Button LED
Input Source
USB
Color
Reset Energy Settings
Display
Energy
Menu
Personalize
Other
Resolution: 1920x1080, 60Hz
Energy Use
On During Active
O During Standby
Maximum: 2560x1440, 60Hz
Operating the Monitor
41
|
Advertisement
Table of Contents
