Table of Contents
Advertisement
DOWNLOADED cycle
You can choose from more cycles available on the SmartThings app on your smartphone.
1. On your smartphone, select the DOWNLOADED cycle.
-
You can choose from PERM PRESS, WOOL, ECO COLD, DENIM, and POWER RINSE.
2. Press Power on your washer.
3. Turn the Cycle Selector to DOWNLOADED.
4. Press and hold Start/Pause (Hold to Start).
Auto dispense
Dosage level setting
Press Detergent or Softener to select the desired dosage level.
• You can select from
Concentration level setting
1. Press and hold Detergent or Softener for 3 seconds to enter the concentration level setting.
2. Press Detergent or Softener to select the desired concentration level.
-
You can select from
3. When complete, press and hold Detergent or Softener for 3 seconds to confirm your changes.
NOTE
• If the Softener or Detergent button's LED blinks, refill the corresponding compartment.
• To determine your water hardness, contact your local water municipality provider. For well water,
conduct a water hardness test.
Untitled-1 49
The LEDs on the Detergent and Softener buttons
indicate whether the auto dispense system is on or off.
If the LED on the button is off, press the button to turn
on the dispenser system by setting the dosage level.
You can also use the buttons to set the concentration
level of detergent and softener. Refer to the
following instructions to set the dosage level and the
concentration level.
The Auto Dispense System does not work if the LEDs on
the buttons are off.
(Less),
(Standard), or
(Normal),
(x2), or
(More),
(Off).
(x3).
English 49
2023-04-28
6:01:04
Advertisement
Table of Contents
