Panasonic Lumix DMC-FX40EB Service Manual page 11

[CASE 1. After replacing MAIN P.C.B.]
When MAIN P.C.B. has just been replaced, all of the model suffix is displayed as follows. (Four pages in total)
[CASE 2. Other than "After replacing MAIN P.C.B."]
• Step 5. Chose the model suffix in "INITIAL SETTINGS": (Refer to "CAUTION 1")
[Caution: After replacing MAIN P.C.B.]
The model suffix can been chosen, JUST ONE TIME.
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can be changed.
Therefore, select the area carefully.
Select the area with pressing "[ UP ] / [ DOWN ] of Cursor buttons".
• Step 6. Set the model suffix in "INITIAL SETTINGS":
• Press the "[ RIGHT ] of Cursor buttons".
• The only set area is displayed, and then press the "[ RIGHT ] of Cursor buttons" after confirmation.
(The unit is powered off automatically.)
11