Product Information - Bresser MicroCam MINI Full HD HDMI Instruction Manual

electrical functionality and safety of the
camera.
• Only use the camera and the original
accessories for the applications described
in this manual.
• The manufacturer assumes no liability for
any other application. This also applies to all
repair and service work that is not carried
out by authorised service personnel.
Therefore all guarantee / warranty claims
expire.
1.5 Cleaning and Maintenance
• The use of unsuitable cleaning agents
and methods can damage the camera
housing!
• Clean the outside of the camera housing
with a dry cloth.
• Blow loose dust off the sensor surface.
• Use high quality lens cleaning towels
or soft cloth and moisten it with a little
bit of pure alcohol (available in a drug
store). Gently wipe the sensor surface in
a circular motion from the centre to the
edge of the lens, applying a small amount
of pressure.
1.6 Care, storage and transport
• Protect the camera from dust, dirt and
moisture. This affects the quality of the
results.
• Avoid fingerprints
contamination on the optical surface.
• Switch off the device after each session
and cover it (to protect against dust and
moisture).
• If you do not plan to use the camera for
an extended period, store the camera and
accessories in a closed container in a dry
and mould-free location.
• If the camera and accessories are used in
a warm and humid climate, special care
is required to prevent the formation of
mould.
• Use the original packaging for shipping
2. Scope of delivery
The package contents are provided for
reference only and may vary.
Fig. 1: Package contents of the MicroCam MINI Full HD HDMI.
A: MicroCam MINI Full HD HDMI
B: HDMI compatible cable
C: USB mouse
D: AC adapter: Entrance: AC 100~240V

3. Product information

• Sony Starvis "back-illuminated" CMOS
and similar
• FHD HDMI-compatible video outputs
• SD card slot for storing the captured
• Integrated
• Powerful ISP (Image Signal Processor)
- 26 -
or transport.
C
D
B
50Hz/60Hz, Output: DC 12V,1A
sensor (Back-illuminated: the sensor
is illuminated from behind - the side
opposite the conductor. The light rays hit
the pixel unhindered, which increases the
sensitivity to light)
images and videos
on-screen
controlling the camera
and other related processing functions.
EN
A
menu for