U-Line WH95TP Specifications

ICE MAKER

Model WH95TP
FEATURES
1. High ice production
2. No drain required
3. Front vented for built-in installation
4. Corrosive resistant components
5. UV resistant components
6. Conserves water
7. Conserves energy
8. Field reversible door with zero clearance
door swing
9. Adjustable temperature control
10. 1/2 inch wide flange
ADDITIONAL FEATURES:
• See through, removable ice bucket
• Travel pin keeps door securely closed
• Available in 110/115V 60 cycle or 220/230V 50/60 cycle
• Shipping weight: 65 lbs.
• White vinyl clad steel cabinet and door
KCC Printed in U.S.A.
13-13/16 (35.1)
* POWER
CORD
15-1/16 (38.2)
W/FLANGE
* ON BACK OF UNIT
INCHES (CENTIMETERS)
BENEFITS
Produces up to 23 lbs. of ice per day, and stores 12 lbs.
Can be easily installed and built into any convenient location. Only needs
1/4 inch outside diameter water line connection.
No need for extra fans, air space, or special venting to the outside of the cabin.
Do not obstruct front grille.
Hinges and fasteners are stainless steel to resist corrosion.
Metal door frame and handle, and specially coated grille withstand adverse
effects caused by the sun.
Only 2-3/4 gallons of water required to produce approximately 22 lbs. of ice.
Uses less electricity than a 75-watt light bulb.
Fits any location, easy access.
Permits adjustment of daily ice rate.
Surrounds front of cabinet for easy mounting in surrounding cabinets.
All specifications subject to change without notice.
25-1/4
(64.0)
HT/W FLANGE
24-3/4
(62.9)
8-1/2
(21.6)
* WATER
LINE
INLET
ADD 1-1/2" TO DEPTH FOR
WATER LINE CONNECTION
8900 N. 55th Street
Milwaukee, Wisconsin 53223
(414) 354-0300
FAX (414) 354-7905
www.u-line.com
17 (43.2)
14-3/8 (36.5)
FLANGE
P/N SS-WH95TP