NAME OF EACH PART View HOME Screenshot Menu A/B/X/Y Left joystick Right joystick D-pad CABLE 2.4G ADAPTER...
Page 3
Gale Wireless Controller *1 / 2.4G Adapter *1 / User Manual *1 / After-sales Card *1 IN-THE-BOX Qualified Certification *1 / USB Cable *1 SUPPORTED Switch / win10/11 / Android / iOS PLATFORM GALE WIRELESS CONTROLLER The PC Tool allows you to customize the controller's parameters in real time, upgrade its firmware, and more. After...
2. Plug the adapter into your computer and press and hold the pairing button on the adapter for 3 seconds; the adapter light will flash rapidly to indicate that it is in pairing mode. 3. After waiting for a few seconds, the controller HOME button indicator and the adapter's indicator light will be always on, which indicates successful pairing.
Page 5
MAPPING The controller is equipped with four remappable additional buttons and compatible with button mapping settings. The settings are as follows: Set Mapping: 1. Press and hold FN + (M1/M2/M3/M4) for 2 seconds, and the indicator of the FN button will begin to display orange, indicating that it is in mapping mode;...
Page 6
PC Tool: The shortcut setting only supports turbo setting for the eight buttons A/B/X/Y/LT/RT/LB/RB. After downloading the PC Tool, you can set the turbo setting for all buttons of the controller. DEADZONE OF JOYSTICK The default setting of this controller has a certain amount of joystick dead zone, users who have the need for 0 dead zone can press FN + press down left OR right joysticks (LS/RS) to switch the 0/10 dead zone of the left and right joysticks respectively.
PC Tools: The joystick supports Joystick Dynamic Calibration, which can be turned on or off from within PC Tools. This feature can be turned on or off in the PC tool. When this feature is turned on, the joystick is calibrated in real-time by comparing the center point of each joystick return;...
SCREENSHOT 1. In Xinput mode, click the Screenshot button to take a screenshot of your PC, and the file will be saved in the folder "PC - Photos - Screenshots". 2. In Switch mode, click the Screenshot button to take a screenshot of your Switch. BATTERY 1.
RESET If the controller is misconfigured or functions abnormally, you can try to reset the controller to recover, the operation is as follows: Long press the HOME button for 10s until the controller vibrates, which means the controller is finished resetting. WARRANTY 12-month limited warranty from the date of purchase.
Page 10
WELCOME TO THE BIGBIGWON COMMUNITY The BIGBIG WON community is built to connect those who seek the winning edge. Join us Discord and Follow our social channels for the latest offerings, exclusive event coverage, and opportunities to score BIGBIG WON hardware.
Need help?
Do you have a question about the GALE and is the answer not in the manual?
Questions and answers