Advertisement
Advertisement
Table of Contents
Related Manuals for BIGBIG WON BLITZ 2
Summary of Contents for BIGBIG WON BLITZ 2
- Page 1 BLITZ 2 Wireless Game Controller PRODUCT MANUAL 产品手册 / 取扱説明書...
-
Page 2: Name Of Each Part
NAME OF EACH PART View HOME Menu Screenshot A/B/X/Y Left Joystick Right Joystick D-Pad light band Channel Indicators Turbo Configs Remap Macro TYPE-C 2.4G ADAPTER Cable... - Page 3 This controller can be adjusted in real time through the BIBIG WON app, or you can use the shortcut setting to adjust the parameters without using the app. With the BIGBIG WON app, you can fine-tune the controller's light effects, motion control, joystick, triggers, buttons, and macros, which are richer and easier to operate within the app compared to the shortcut setting.
- Page 4 The 2.4G adapter and the controller have been paired by default, so after the controller is turned on, the connection can be completed by inserting the 2.4G adapter into the console; if it is not connected, it needs to be re-paired, the operation is as follows: 1.
-
Page 5: Mode Switch
MODE SWITCH The controller supports two modes: Xinput and Switch. Before connecting, you need to switch to the corresponding mode in order to use it. 1. Press and hold the B+HOME button for 2 seconds until the HOME indicator turns green to switch to Xinput mode. -
Page 6: Macro Recording
TURBO This controller supports setting turbo, and the supported buttons include A/B/X/Y、↑/↓/←/→、LT/RT/LB/RB、M1/ M2/M3/M4 a total of sixteen buttons, and the settings are as follows: Setting Turbos: Press and hold Turbo button + "button to be set", the FN indicator will flash twice, which means it is turned on successfully. - Page 8 ON-BOARD CONFIGS Switch mode: 1. First click the Configs button so that the channel indicator changes from red to white, indicating that the configuration can now be switched. The four indicators in this mode represent four different on-board configurations. 2. Click the Configs button again to switch configurations, and the indicators will switch in a top-down order, with the first indicator being on for the first on-board configuration, and so on.
-
Page 9: Joystick Calibration
JOYSTICK CALIBRATION When the joystick drifts severely, cannot be pushed to the maximum value, you can try to calibrate the joystick as follows: 1. Press and hold View+Menu at the same time for 3 seconds, the left and right light bands will be in orange breathing mode at the same time, which represents entering calibration mode. -
Page 10: Vibration Control
VIBRATION CONTROL The vibration motor can be turned on and off by pressing FN + →. ●PC Tool: The shortcut settings only control the vibration on and off. After downloading the PC Tool, you can also adjust the start/maximum intensity of the vibration by using it. BATTERY When the power level is too low, the light bands on both sides of the controller will be forced to go out, and the configuration light will flash 10 times in red at a frequency of 2 times per second, once every five minutes. -
Page 11: Warranty
WARRANTY 12-month limited warranty from the date of purchase. - Page 12 WELCOME TO THE BIGBIGWON COMMUNITY The BIGBIG WON community is built to connect those who seek the winning edge. Join us Discord and Follow our social channels for the latest offerings, exclusive event coverage, and opportunities to score BIGBIG WON hardware.
Need help?
Do you have a question about the BLITZ 2 and is the answer not in the manual?
Questions and answers