Celviano AP-750 User Manual page 95

Overdub Recording (record to the right-hand part track to layer over the recording
of the left-hand part track)
Use "Recording to the Left-Hand Part
1.
Press and hold the "0(REC)" button until the "R" Track Indicator flashes.
• The right-hand part track will be recorded.
• The "L" in the track indicator switches from a blink to lit.
2.
If you do not want the left-hand part track to play during recording, hold down the
"a" button and press the B}1 key (Song Playback Part selection).
Switching On/Off or Changing Setting Values Using a Single Key (operation type D)
• The "L" Track Indicator goes off.
• Each time B }
(No Playback).
3.
Next, proceed from step 4,
• Some settings, including beat and tempo, can be set for left-hand part track recording.
Track" to enter the record standby state before proceeding.
1 key is pressed, the "L" Track Indicator switches between lit (Playback) and unlit
A0 C1 C2
B 1
"Recording to the Left-Hand Part
C3 C4 C5
EN-94
Recording a Performance
C6 C7 C8
Track".