Table of Contents
Advertisement
4.
Recording will begin when you start playing.
• You can also start recording by holding down the "0(REC)" button and touching the "a"
button.
• The "0(REC)" button switches from blinking to lit, and the "a" button goes off.
• If you want to redo your recording, see
5.
To end recording, touch the "0(REC)" button.
• The "0(REC)" button will light up white again and the "a" button will light up.
• To play back the recording immediately, touch the "a" button.
Starting over from the beginning during a recording
If you want to redo the recording due to a performance error or other reason, hold down the "0(REC)"
button until it flashes during recording. The recorded data is discarded and the process returns to a
record standby state.
"Starting over from the beginning during a
EN-93
Recording a Performance
recording".
Advertisement
Table of Contents
