Table of Contents
Advertisement
Sound does not become stronger or weaker when I change the way I play (touch).
Cause:
[Touch Response] is set to <Off>.
Solution:
Set [Touch Response] to a setting other than <Off>. For details, see
Volume Made by the Strength of Pressure Placed on a Key (Touch
The tone of the sound, effects, and so forth, do not change (i.e., the Digital Piano
does not return to its default settings), even after turning the power off and back on
again.
Cause:
[Auto Resume] is set to <Enable>.
Solution:
Switch [Auto Resume] to <Disabled> then turn the power off and back on again. For more
information, see
Cannot send or receive MIDI when connected to a computer.
Solution:
• Check that the Digital Piano is properly connected to the computer with a USB cable, or
that the correct is selected in the settings of the computer's music software.
• Turn off the power to this Digital Piano and close the music software on your computer,
then turn on the power to this Digital Piano and restart the music software on your
computer.
Some tones have the same timbre but slightly different sound quality and volume
depending on keyboard position.
Cause:
This is a boundary between sound ranges caused by electronic processing called digital
sampling
* This process records the original sound of the instrument in multiple ranges, including
low, mid, and high ranges, and creates a single tone in order to reproduce the sound
quality of each range of the original instrument.
When pressing buttons, the sound that is being played is temporarily interrupted or
the sound quality sounds slightly different.
Cause:
When using Layer, Duet, playing a Built-in Song, or using the recording function, multiple
parts sound simultaneously. If you press buttons in such a case, the tone-specific internal
effect settings will be automatically changed, and depending on the part, this
phenomenon may occur, but it is not a malfunction.
I don't know how to delete a User Song.
Solution:
Deletion of User Songs can be executed from a smart device connected to the Digital
Piano. For details, see the instructions for the dedicated app.
https://web.casio.com/app/en/music_space/manual/
I can't play songs recorded directly to a USB Flash Drive.
Solution:
Try formatting the USB flash drive in exFAT format on your computer and then formatting
it on the instrument. For more information, see
"Saving the Digital Piano Settings (Auto
*
and is not a malfunction.
"Formatting a USB Flash
EN-166
Troubleshooting
"Changing the
Response)".
Resume)".
Drive".
Advertisement
Table of Contents
