U-Line Origins 29R Supplementary Manual

th
8900 North 55 Street ▪ Milwaukee, WI ▪ 53224-9540 ▪ 414-354-0300 ▪ (fax) 414-354-7905
¼" CUSTOM INSERT PANEL SIZES
BI-95
BI-98
29 Series
1115 Series
1175 Series
o Zero clearance with a flush/flat door panel.
o Door will accept a raised panel. Allow proper clearance, on hinge
side when installing a raised panel. Amount of clearance will
depend on raised panel thickness.
o The maximum panel thickness when inserted into the door reveal
(channel) is ¼" thick.
o For raised panels on BI 95, BI98 series and 29 series models the
depth of the reveal is ¼" on both sides and bottom and ½" on top.
o For raised panels on 1115, and 1175 series models the depth of
the reveal is ¼" on both sides, bottom, and top.
o Panel not to exceed 20 pounds.
o
Conversion information: 1 inch = 2.54 cm
ORIGINS
13 15/32" H x 12 15/16" W
15 15/16"H x 13 15/16" W
21 13/32" H x 19 13/16" W
26 15/16" H x 13 15/16" W
26 15/16" H x 22 15/16" W
30164 Rev B