Table of Contents
Advertisement
Specify the Number of the Patch you wish to use by pressing
the relevant Number pedal.
The indicator
for the Number pedal you have pressed lights,
4
Changing the Group and Bank
The Group and Bank can be changed at the same time, similar
to 2 and 3 above.
showing that the new Patch is now selected.
3
Tochange the Group
You can change the Group in a manner similar to Bank
selection.
1° Press [GROUP].
The indication in the display for the Group will begin
flashing.
* If you wish to cancel the Group selection, press [GROUP] again.
2 Specify the Group of the Patch you wish to use by pressing
the relevant Number pedal.
The unit switches to the Group you have selected, and the
indication in the display will now light steadily instead of
flashing. The indicator over the Number pedal that was
selected before you pressed [GROUP] will begin flashing,
showing that you should now specify the Number of the
Patch you wish to use. (At this point, the new Patch has not
yet been selected.)
* If you wish to cancel the Group selection, simply press [GROUP]
twice,
3 Specify the Number of the Patch you wish to use by pressing
the relevant Number pedal.
The indicator
for the Number pedal you have pressed lights,
showing that the new Patch is now selected.
Press [GROUP].
The indication in the display for the Group will begin
flashing.
Specify the Group where the Patch you wish to use is
located by pressing the relevant Number pedal (1 - 4).
Press the BANK pedal.
The Bank in the display will flash.
Specify the Bank of the Patch you wish to use by pressing
the relevant Number pedal.
Specify the Number of the Patch you wish to use by pressing
the relevant Number pedal.
The indicator over the Number pedal you have pressed will
be lit, showing the new Patch is selected.
Advertisement
Table of Contents
