Table of Contents
Advertisement
<PITCH SHIFTER>
PITCH 1 (-12- 12)
PITCH 2 (-12 - 12)
These adjust the amount of pitch change to be applied to each
pitch shifted sound, in semitone steps. The pitch can be raised
or lowered by one octave (12 semitones).
FINE 1 (-20 - 20)
FINE 2 (-20 - 20)
This is a fine adjustment for the amount of the pitch change for
each pitch shifted sound.
LEVEL 1 (0 - 100)
LEVEL 2 (0 - 100)
Adjust the volume of each pitch shifted sound.
D.LEVEL (Direct Level) (0 - 100)
Adjusts the volume of the direct sound.
CHORUS / FLANGER / PHASER / TREMOLO
@ CHORUS/FL
@ PHASER
@ TREMOLO
MODE
PreDLY/MAN
RATE
DEPTH
TONE
E.LEV/RESO
STEP
Allows you to select one of the following four effects:
Chorus ....adds a sense of spaciousness, and makes the sound
fatter
Flanger ....applies characteristic undulations to the sound
Phaser ..... gives the sound a revolving kind of feel
Tremolo .. applies cyclical changes to the volume of the sound
MODE (CH, S.CH, FL, H.FL, PH1, PH2, PH2, PH4, tr)
This selects an effect type.
When the effect is turned on, the effect indicator for the selected
mode will light.
LOH (CH): Chorus]
This chorus effect outputs the same sound from both L and R.
[ SCH
(S.CH): Stereo Chorus]
This is a stereo chorus effect that adds different chorus
sounds to L and R.
[FL (FL): Flanger]
This creates a flanging effect.
[HFL (H.FL): Hi Band Flanger]
By applying the effect to only the harmonics, this prevents
the bass sound from getting too thin.
LPH {(PH1): Phaser 1]
This is a four-phase effect. A light phaser effect is obtained.
[ PH2 (PH2): Phaser 2]
This is an eight-phase effect. It is the most popular phaser
effect.
[ PHJ (PH3): Phaser 3]
This is a ten-phase effect. A deep phase effect is obtained.
[PHY
(PH4): Phaser 4]
This is a bi-phase effect with two phasers connected in
series. A unique and powerful phase effect can be obtained.
[Er (tr): Tremolo]
This creates a tremolo effect.
24
Advertisement
Table of Contents
