Full Overlay Drawer Panels Drawer Panel Preparation Full overlay drawer panels completely cover the drawer fronts and handles to give a built-in appearance. Overlay units are shipped ready for full overlay installation. Note: For standard installations, both drawers mount the same and a 1/2"...
CAUTION It is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardware is installed. 4. Remove tape adjoining the panels and enlarge the five holes in the drawer panel using a 0.201" (#7) drill. 5.
Adjusting Drawer Alignment WARNING SHOCK HAZARD — The unit must be unplugged from the wall outlet during drawer removal, adjustment and re-installation. Drawer Removal 1. Confirm that the unit is unplugged from wall outlet. 2. Unplug the drawer’s connection wiring (top drawer only).
Page 5
Minor Adjustment: Note: The mounting holes on the slide are slightly larger than the screws’ diameter. 1. Loosen one slide’s mounting screws. 2. Level the slide. 3. Retighten the screws. See Figure 12. 4. Repeat procedure for Figure 12 the other slide. Severe Adjustment: Note: The slides have extra mounting holes that...
For more than four decades, U-Line has distinguished itself as the leader in built-in undercounter ice making, refrigeration and wine storage appliances. U-Line Corporation, located in Milwaukee, WI, is a family operated manufacturer of built-in ®...
Need help?
Do you have a question about the Echelon 2275DWRROL and is the answer not in the manual?
Questions and answers