Comms365 C365-5G-E User Manual

Comms365 C365-5G-E User Manual

5g nr external router

Advertisement

C365-5G-E
5G NR EXTERNAL ROUTER
User Manual
For support, please submit a ticket at
https://comms365.mojohelpdesk.com
or call 01234 865880.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C365-5G-E and is the answer not in the manual?

Questions and answers

Summary of Contents for Comms365 C365-5G-E

  • Page 1 C365-5G-E 5G NR EXTERNAL ROUTER User Manual For support, please submit a ticket at https://comms365.mojohelpdesk.com or call 01234 865880.
  • Page 2 5G-E Interfaces and Indicator Light Descriptions POE (2.5 Gigabit) SIM 1 SIM 2 Reset DC Power Interface USB Type C Power Internet Wi-Fi 4G/5G Network Signal...
  • Page 3 5G-E Configuration Set up SIM Card & Internet Access (POE Power Supply) Step 1: Unscrew the two screws on the Step 2: Insert SIM card (direction cover of the device and remove the shown on the SIM card interface). The cover.
  • Page 4 Step 5: Connect the network cable to the POE port of the POE adapter, connect the POE adapter to the power supply and the 5G-E device will automatically turn on. Connect a network cable to the LAN port of the POE adapter and connect the IDU to provide a wired or wireless network for other Internet devices.
  • Page 5 Device Installation (Wall-Mounted) Device Installation (Pole-Mounted) Device Configuration Step 1: Power the device, check the signal strength indicator is on, the dial is successful if the 4G/5G indicator is on. Step 2: The terminal devices could access the 5G-E by LAN port or Wi-Fi. Wi-Fi SSID: ODU_2.4G_XXXX (Please note the 5G-E Wi-Fi is for easy configuration only, not for a speed test.)
  • Page 6 Step 3: Open the browser, and the page is automatically displayed. (if not, manually enter 192.168.1.1) Default Account: admin Default Password: admin Step 4: Set the username and password for the WLAN. Step 5: Set the password for logging in the host. After the application setting is complete, the login page will be displayed.
  • Page 7 Troubleshooting Choose Networking Mode ‘NSA’ setting. (Network Setting > Mobile Network > Mobile Network Settings) If still no network connection, change the Networking Mode to ‘SA’. Choose IP Type ‘PIPV4’ settings. (Network Setting > Mobile Network > Advanced Settings) If still no network connection, change the IP Type to ‘IPV6’.

Table of Contents