Advertisement
COMMS365 DUAL SIM 4G ROUTER WITH WI-FI
This guide is to assist you in the set-up of the C365-4GDS-W router. Inside the box you will find:
1 x C365-4GDS-W router
•
1 x Wi-Fi antenna
•
1 x Power supply
•
1 x Ethernet cable
•
2 x 3G/4G antennas
•
Please check all components listed are present on receipt.
SUPPORT
If you have any questions or experience any issues, please send a Support Request Ticket to the
Comms365 Helpdesk https://comms365.mojohelpdesk.com/, or phone 01234 865880, Option 2.
C365-4GDS-W
Quick Start Guide
C365-4GDS-W Quick Start Guide – v1 (June 2018)
Advertisement
Table of Contents
Related Manuals for Comms365 C365-4GDS-W
Summary of Contents for Comms365 C365-4GDS-W
-
Page 1: Quick Start Guide
C365-4GDS-W COMMS365 DUAL SIM 4G ROUTER WITH WI-FI Quick Start Guide This guide is to assist you in the set-up of the C365-4GDS-W router. Inside the box you will find: 1 x C365-4GDS-W router • 1 x Wi-Fi antenna •... - Page 2 CONFIGURING THE ROUTER – LOG IN To configure the C365-4GDS-W router, you will need to log in and follow the steps detailed in this guide. Connect the Ethernet cable to the LAN or LAN/WAN port on the router and the Ethernet port on your laptop/PC. Power the router on by plugging in the power supply.
- Page 3 5. If using both SIM slots, complete the information for ‘Sim 2 APN’, ‘Sim 2 User’ and ‘Sim 2 Passwd’ 6. All other fields should be left as default or blank 7. Click ‘Save’ Page 4 www.comms365.com | 01234 865880 | sales@comms365.com...
- Page 4 If an IP address is not displayed, ensure the SIM(s) and antennas have been inserted/attached correctly and that the ‘Configure Mobile Settings’ steps have been followed correctly. Confirm with your provider that the SIM is active and that there is sufficient data. Page 5 www.comms365.com | 01234 865880 | sales@comms365.com...
- Page 5 7. Click ‘Save’ CONFIGURATION COMPLETE The C365-4GDS-W router is now configured and ready to use. If desired, you can unplug the Ethernet cable from your laptop/PC and connect to the router via Wi-Fi. To make changes to any of the configuration settings, log in with the username ‘admin’ and the password you chose in section ‘Change Password and Configure Remote Access’.
Need help?
Do you have a question about the C365-4GDS-W and is the answer not in the manual?
Questions and answers