Vci-Omniview - GE Voluson S6 Basic User Manual

Hide thumbs Also See for Voluson S6:

9.8.2 After the VCI-A Acquisition

9.9 VCI-Omniview

After [Freeze] the system switches automatically to freeze mode and the "Vol. Cine" menu

appears. The selected format and the last acquired volume will be present on the monitor.

Upon [Freeze] a certain number of volumes will be stored in the cine memory. The sequence

can be reviewed volume by volume. 'Volume Cine'

VCI-OmniView is an option. If this option is not installed, the [VCI-OmniView] key is hidden.

SingleView is an option for Voluson® S6 only. This will be activated when SingleView option is

installed and Advanced VCI (VCI-OmniView) option is not installed. SingleView supports only

basic controls of VCI-OmniView with Line method.

By setting the necessary sweep angle for the desired ROI, the system provides a coronal

plane (Omni View). The rendering box is very thin and so you can visualize the tissue

information of a thick slice. A mixture of surface texture and transparent maximum (or X-ray)

rendering modes (70/30) plus a low setting of surface transparency (20-50) is used. The

resulting image shows the average (integrated) gray value of the tissue contained within the

narrow box. Omni View improves the contrast resolution and the signal / noise ratio and

therefore facilitates the detection of diffuse lesions in organs. The result is an image with no

speckle pattern and a highly improved tissue contrast.

The "4D Mode" menu appears on the menu area (scan mode).

on page 9-95

Voluson® S6/S8 Basic User Manual

5433669-100 Revision 4

Show Quick Links