2. Install:
• Torsion spring "1"
(to the kick shaft "2")
TIP
Make sure the stopper "a" of the torsion spring
fits into the hole "b" on the kick shaft.
b
2
3. Install:
• Spring guide "1"
TIP
Slide the spring guide into the kick shaft, make
sure the groove "a" in the spring guide fits on
the stopper of the torsion spring.
4. Install:
• Kick shaft assembly
Refer to"SETUP PROCEDURES" on page
10-11.
KICKSTARTER KIT (OPTIONAL PARTS)
a
1
10-16