ViewSonic LDS135 Series Quick Start Manual page 8

All-in-one direct view led display solution kit

Hide thumbs Also See for LDS135 Series:

Table of Contents

2. How to Use Preset Height

At any height (unavailable under the reset and error status), keys 1/2/3 may be used to

quickly reach the preset height. If the current height has reached such preset height, no

actions will be performed.

3. How to Change the Height

• Use the "Up" key to lift the display. The lift will automatically stop upon reaching the

height limit. Please note, the "Up" key is a "click to act" key, i.e., upon releasing the

key the lift will not immediately stop. Instead, it will slow down for a short distance

then stop.

• Use the "Down" key to lower the display. The lift will automatically stop upon

reaching the height limit. Please note, the "Down" key is a "click to act" key, i.e.,

upon releasing the key the lift will not immediately stop. Instead, it will slow down for

a short distance then stop.

Table of Contents

Lds135-152