Subscribe to Our Youtube Channel
Related Manuals for ProLights KAPPAPIX 26B1X1BF
Summary of Contents for ProLights KAPPAPIX 26B1X1BF
- Page 1 KAPPAPIX 26B1X1BF XR LED wall module, SMD1515 BF, p2.6, 1200nit, 50x50, 7680Hz, Brompton, 6,3 kg USER MANUAL English version REV.01-07/23...
- Page 2 PROLIGHTS product are trademarks OWNED or licensed by Music & Lights S.r.l., its affiliates, and subsidiaries. PROLIGHTS is a registered trademark by Music & Lights S.r.l. All right reserved. Music & Lights – Via A. Olivetti, snc - 04026 - Minturno (LT) ITALY.
-
Page 3: Table Of Contents
MAINTENANCE AND CLEANING THE PRODUCT............17 MAINTENANCE ON INDOOR PRODUCT ..............17 MAINTENANCE ON OUTDOOR PRODUCT ..............18 CORRECT STARTUP/SHUTDOWN SEQUENCE ............. 18 TRANSPORTATION AND STORAGE ................18 GENERAL INDICATIONS FOR USE ................19 TROUBLESHOOTING ..................... 20 PROLIGHTS - KAPPAPIX 26B1X1BF... -
Page 4: Safety Information
• Do not reapply power until repairs have been completed. • Refer any service operation not described in this manual to PROLIGHTS Service team or an authorized PROLIGHTS service center. Installation •... - Page 5 • Warning! Disconnect the fixture from AC mains power and allow to cool for at least 10 minutes before handling. • Only technicians who are authorized by PROLIGHTS or Authorised service partners are permitted to open the fixture. • Users may carry out external cleaning, following the warnings and instructions pro- vided, but any service operation not described in this manual must be referred to a qualified service technician.
-
Page 6: Optional Accessories
• KXDCL10 Data cable for KAPPAX LED display series assembled with RJ45, L 10 m • BROSX40 BROMPTON 4K LED video processor • BROXD10G BROMPTON data distribution unit • FMTOOL Front maintenance tool for OMEGAX-DELTAX series LED screens (INDOOR) • MRTOOL Mask Replacement TOOL for OMEGAX26B and OMEGAX26BE PROLIGHTS - KAPPAPIX 26B1X1BF... -
Page 7: Technical Drawing
2 - TECHNICAL DRAWING 500 mm 91 mm [19.7 in] [3.6 in] Fig. 01 Weight: 6,3 kg - 13,89 lbs PROLIGHTS - KAPPAPIX 26B1X1BF... -
Page 8: Product Overview
12. POWER OUT CONNECTOR: power output for connection of multiple units in series 13. MECHANICAL CORNER PIN: mechanical corner protection closing 14. ANGLE MECHANICS: allow both concave and convex precise installation of +10° / -10° Fig 02 PROLIGHTS - KAPPAPIX 26B1X1BF... -
Page 9: Installation
If you use the KSXHGB02 accessory, remove highlighted pins for grounding applications. Align the KSXHGB fly/ground bar accessories, then adjust the height of the feet toward the ground to keep the ground beam perfectly horizontal. Fig 03 PROLIGHTS - KAPPAPIX 26B1X1BF... - Page 10 Hook the cabinet to the ground bar, taking care to align the holes in the screen with the pins in the bar. Hook the panels sideways and lock them by push and turning the locking lever. Fig 04 PROLIGHTS - KAPPAPIX 26B1X1BF...
- Page 11 Hook down the cabinet of the next row and lock them by push and turning the locking lever, and continue horizontally forward. Hook the panels sideways and lock them by turning the locking lever. Fig 05 PROLIGHTS - KAPPAPIX 26B1X1BF...
- Page 12 Install SIGMAX series LED wall back plates, KSXBSC accessory, for ground fixing. Finally, to stiffen the structure, install the KSXGHR accessory between the two rear supports. Fig 06 PROLIGHTS - KAPPAPIX 26B1X1BF...
-
Page 13: Fly Bar Hanging System
Remove the noted feet and pin located at the bottom of the KSXHGB accessory. Remove the noted center pin on the KSXHGB accessory, then install the eye hook. If you use the KSXHGB02 accessory, remove highlighted feet and center pins, then install the eye hook. Fig 07 PROLIGHTS - KAPPAPIX 26B1X1BF... - Page 14 Hook the cabinet to the KSXHGB fly/ground bar accessories, taking care to align the holes in the screen with the pins in the bar. Hook down the panels of the next row and lock them by push and turning the locking lever, and continue horizontally forward. Fig 08 PROLIGHTS - KAPPAPIX 26B1X1BF...
- Page 15 NOTE: when connecting the bars, make sure there are no steps between one panel and another horizontally and on the front of the panels. Finally, attach the screens to the truss with the help of fastening accessories such as clamps and/or safety ropes. Fig 09 PROLIGHTS - KAPPAPIX 26B1X1BF...
-
Page 16: Connection To The Mains Supply
• Connect the power connector into the Mains input socket (100-240 VAC-50/60 Hz). • The product is then ready for its operations and can be controlled through the available input sig- nals on board. • To disconnect power from the product, disconnect the Mains from the socket. PROLIGHTS - KAPPAPIX 26B1X1BF... -
Page 17: Data Connection
MAIN AND BACKUP DATA LINE For all Prolights led screen cabinet it’s possible to install a MAIN data line and a BACKUP data line. This allows to see image on led screen in case of MAIN failure. MAIN and BACKUP need to be assigned from the PC software to the outputs of the processor. - Page 18 NOTE: it’s always suggested to use different processor for MAIN line and BACKUP line Last cabinet First cabinet of the chain of the chain DATA MAIN DATA BACKUP Fig. 18 PROLIGHTS - KAPPAPIX 26B1X1BF...
-
Page 19: Maintenance
• Electrical and functional checks; eventual repairs. WARNING: the use of alcohol or any other detergent or liquid could damage the product. • All other service operations on the product must be carried out by PROLIGHTS, its approved service agents or trained and qualified personnel. -
Page 20: Maintenance On Outdoor Product
LED displays, the ambient temperature and relative humidity for storage shall be ranging from -30°C to +60°C and 10% to 95% RH. Do not store the cabinets in an environment with chemicals that are volatile, corrosive, or flammable. PROLIGHTS - KAPPAPIX 26B1X1BF... -
Page 21: General Indications For Use
Consult our professional personnel at the service center if the LED display must be installed in any of these places. PROLIGHTS - KAPPAPIX 26B1X1BF... -
Page 22: Troubleshooting
Check whether the hub card contacts properly with the receiving card • Signal output of the • Check output signals of the receiving card of the previous cabinet previous cabinet, or replace the signal cable faulty PROLIGHTS - KAPPAPIX 26B1X1BF... - Page 23 • Dirty led surface • Clean the fixture regularly. Contact an authorized service center in case of technical problems or not reported in the table can not be resolved by the procedure given in the table. PROLIGHTS - KAPPAPIX 26B1X1BF...
- Page 24 Note...
- Page 25 Note...
- Page 26 Note...
- Page 28 PROLIGHTS is a trademark of prolights.it Via A.Olivetti snc MUSIC & LIGHTS S.r.l. support@prolights.it 04026 - Minturno (LT) ITALY musiclights.it Tel: +39 0771 72190...
Need help?
Do you have a question about the KAPPAPIX 26B1X1BF and is the answer not in the manual?
Questions and answers