Table of Contents
Advertisement
User Manual
Installation Instructions (Continued)
Removing the Transport Bolts
WARNING: You must remove the transport bolts from the
backside before using the product.
1. Loosen the 4 transport
bolts with a spanner.
2. Remove the bolts including
the rubber parts and keep
them for future use.
3. Close the holes using
the cover caps.
Acoustic Sponge
NOTE: Please make sure to assemble the acoustic sponge
strips, which can effectively reduce the noise caused by the
machine while working, in order to provide you with a more
peaceful and quiet living environment.
1. Lay the machine on the floor, using some soft
material like foam or clothes between the machine
and floor for protection.
2. Apply the 2× longer sponges to the long bottom edges
of machine, and the 2× shorter sponges to the short edges.
09
Connect the Water Supply Hose
• WARNING: To prevent leakage or water damage, follow
the instructions in this chapter.
• WARNING: Do not kink, crush or modify water inlet hose.
• Connect the water supply hose to the water inlet valve and
a water tap with cold water as indicated.
• NOTE: Check if the connections are tight.
Connect manually, do not use tools.
Drain Hose
• WARNING: Do not kink or protract the drain hose.
• WARNING: Position drain hose properly, otherwise
damage might result in water leakage.
• WARNING: Do not remove the buckle of the drain pipe.
The are two optional ways to place the end of the drain hose.
1. Put it into the water trough.
2. Connect it to the branch drain pipe of the trough.
Water trough
Advertisement
Table of Contents
