Table of Contents
Advertisement
User Manual
Operating Instructions (Continued)
Washing Temperature
When required, the washing temperature can be adjusted by
pressing the temperature button in the following steps:
Cold → 20° C → 30° C → 40° C → 60° C → 90° C
Spin Speed
When required, the spinning speed can be adjusted by
pressing the Spin Speed button in the following steps:
0 → 600 → 800 → 1000 → 1200 → 1400
Reload
This operation can be executed during the washing progress.
When the drum is still rolling and there is large amount of
water with high temperature in the drum making it unsafe to
open the door – it can also not be opened forcefully.
To begin the Reload function, press the Start/Pause button
for 3 seconds to add the clothes mid cycle.
Please follow the steps as bellow:
1. Wait until the drum stops rotating.
2. The door lock is unlocked.
3. Add in your additional laundry
4. Close the door and press the Start/Pause button.
CAUTION: Do not use the Reload function when the
water level is over the edge of the inner tub or the
temperature is high.
15
Child Lock
Use this function to avoid any misuse of the controls.
To activate, press the Extra Option & Speed Wash buttons
together for 3 seconds until an alert sounds and the
Child Lock indicator is displayed.
• CAUTION: When activated, the display will alternately
show "CL" and the remaining time.
• Pressing any other buttons will cause the Child Lock
indicator to flash.
• When the program ends, "CL"& "End" will alternate
on the display.
• The Child Lock deactivates the function of all buttons
except the On/Off button and the Child lock button
combination. Only by simultaneous pressing Extra Option
& Speed Wash can deactivate the Child Lock.
• Please deactivate the Child Lock before selecting
a new program.
Refer to the table on page 16 for the availability of additional
functions based on the program type.
Advertisement
Table of Contents
