Technical Specifications - Technics SA-DX930 Operating Instructions Manual

RQTSON9
Technical specifications (DIN 45 500)
W@ AMPLIFIER SECTION
Power output (at 240 V)
DIN 1 kHz (T.H.D. 1 %)
20 Hz-20 kHz continuous power output
both channels driven
Total harmonic distortion
rated power at 20 Hz-20 kHz
half power at 1 kHz
Power output at the Dolby Pro Logic operation
DIN 1 kHz (T.H.D. 1%)
2 x 100 W (6 Q)
2x80 W (69)
0.05 % (6 Q)
0.03 % (6 2)
Front 2x 100 W (6 Q)
Center 100 W (6 Q)
Surround 2x 100 W (6 Q)
Power bandwidth
both channels driven, -3 dB 10 Hz~-40 kHz (6 Q)
Damping factor 30 (6 Q)
Load impedance
Front
AorB 4162
AandB 8-160
Center 6-160
Surround 6-16 Q
Frequency response
PHONO RIAA standard curve (30 Hz-15 kHz) +0.8 dB
CD, TAPE, DVD, TV, VCR
Input sensitivity and Impedance
PHONO
CD, TAPE, DVD, TV, VCR
S/N at rated power (6 ©)
PHONO
CD, TAPE, DVD, TV, VCR
Tone controls
10 Hz-40 kHz, +3 dB
3 mV/47 kQ
200 mV/22 kQ
70 GB (IHF, A: 80 dB)
75 OB (IHF, A: 85 dB)
BASS 50 Hz, +10 to -10 dB
TREBLE 20 kHz, +10 to ~10 dB
Output voltage
TAPE REC (OUT), VCR OUT 200 mV
Channel balance (250 Hz~ 6.3 KHZ) +1 dB
Channel separation 55 dB
Headphones output level and impedance 430 mV/330 Q
Subwoofer frequency response 7-100 Hz, +3 dB
Digital Input
Optical CD, DVD
W@ FM TUNER SECTION
Frequency range 87.50-108.00 MHz
Sensitivity
S/N 30 dB 1.5 pV/75 Q
S/N 26 dB 1.3 pVW/75 QO
S/N 20 dB 1.2 1V/75.O
IHF usable sensitivity (IHF'58) 1.5 pV/75.Q
IHF 46 dB stereo quieting sensitivity 22 wV/75 QO
Total harmonic distortion
MONO 0.2%
STEREO 0.3%
S/N
MONO 60 dB (73 GB, IHF)
STEREO 58 dB (67 dB, IHF)
Frequency response
20 Hz-15 kHz +1 dB, -2 dB
Alternate channel selectivity
+400 dB 65 dB
Capture ratio 1.5 dB
Image rejection at 98 MHz 40 dB
(F rejection at 98 MHz 70 dB
Spurlous response rejection at 98 MHz 70 dB
AM suppression 50 dB
Stereo separation
1 kHz 40 dB
Carrler leak
19 kHz -30 dB (-35 dB, IHF)
38 kHz ~50 dB (-55 dB, IHF)
Channel balance (250 Hz-6.3 kHz) +1.5 dB
Limiting point 1.2uV
Bandwidth
IF amplifier 180 kHz
FM demodulator 1000 kHz
Antenna terminal 75 Q (unbalanced)
Mi AM TUNER SECTION
Frequency range 522-1611 kHz (9 kHz steps)
530-1620 kHz (10 kHz steps)
Sensitivity 20 pV, 330 }tV/m
Selectivity (at 999 kHz) 55 dB
IF rejection (at 999 kHz) 50 dB
M@ VIDEO SECTION
Output voltage at 1 V input (unbalanced) 140.1 Vp-p
Maximum input voltage 1.5 Vp-p
Input/output impedance 75 Q (unbalanced)
@ GENERAL
Power supply
Power consumption
AC 230-240 V, 50 Hz
240 W
(in standby condition: 2 W)
430 x 158 x 324.5 mm
9.7 kg
Dimensions (W x H x D)
Weight
Notes:
1. Specifications are subject to change without notice.
Weight and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer,