Dvd 6Ch Input Mode - Technics SA-DX930 Operating Instructions Manual
Av conirol stereo receiver
Hide thumbs
Also See for SA-DX930:
- Operating instructions manual (45 pages) ,
- Operating instructions manual (44 pages) ,
- Operating instructions manual (44 pages)
Table of Contents
Advertisement
RQT5019
DVD 6CH INPUT mode
Use this mode to reproduce 6 channel discrete sources that have
been connected using analog 6 channel input. This bypasses the
decoders in this unit.
°
mse
bl
(©). @ maa
°
ie]
onpnd a
qmoocrd
© eo
il INPUT SELECTOR
(O)
A is
DVD 6CH INPUT
Ensure the front speakers are connected to the A terminals and
"SPEAKERS A' is selected.
Turn [INPUT SELECTOR] to select "DVD."
Press [DVD 6CH INPUT] to select "DVD 6CH."
Changes as follows, each time the button is pressed.
DVD 6CH 7% DVD (2CH)
(f you press this button while another source (CD, PHONO,
etc.) is selected, the receiver switches the source to DVD
and engages the DVD 6CH INPUT mode.
Start the desired source.
Follow your equipment's operating instructions.
®@ You cannot select a DSP mode while in the DVD 6CH INPUT
mode.
® This mode cannot be turned on while SPEAKERS B is on. This
mode is automatically cancelled if SPEAKERS B is selected
and. the modes
in the memory
for all sources will also be
switched to STEREO. The modes must be selected again for all
sources when SPEAKERS B is turned off again.
© Any speaker settings you have made
(™» page 18-19) are
ineffective in the DVD 6CH INPUT mode. If you need to change
speaker settings, make the settings on the other unit.
Advertisement
Table of Contents
