Bromic Heating Eclipse Master Remote Troubleshooting Manual page 3

4. Paring the Light Functions
Locate the P3 button on the back of the standard remote.
Using a paper clip, press the P3 button. You will hear a
continuous beep.
Press the corresponding top light button (100%) on the
master remote. You will hear an intermittent beep.
The light functions are now paired.
The programming has been completed for this dimmer.
Bromic.com
Turn the remote over and press the top light button (100%).
5. You can now add additional dimmers to the selected zone to create a group of
dimmers or change the zone for individual dimmer control.
Repeat steps 3 & 4 listed above for each standard remote to be paired to the master remote.
We recommend labeling the standard remotes to match the dimmers and zones for future reference.
If this does not resolve the issue, you will need to schedule a troubleshooting call with Bromic Tech Support.
When contacting our Tech Team we request you submit model numbers of the heaters and controls, photos of the
installed products and installation wiring along with proof of purchase to validate any warranty.
Please remember to request service calls 48 hours in advance to ensure availability.
North America - Technical Support Austrailia - Technical Support
(800) 301-1293
www.bromic.com www.bromic.com.au
Europe - Technical Support
1300 276 642 +31 737041029
www.bromic.co.uk
Bromic.com