Ledvance Area Light 5A Manual
Ledvance Area Light 5A Manual

Ledvance Area Light 5A Manual

Value class wattage selectable area flood
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

LEDVANCE Luminaries
Value Class Wattage Selectable Area Flood
Area Light 5A
The LEDVANCE Value Class Wattage
Selectable Area Flood 5A luminaires are
environmentally preferable LED
alternatives to traditional HID luminaires,
offering up to 78% in energy savings.
Ideal in place of traditional luminaires, or
in new installations, the Area Light 5A
series are wattage/lumen selectable for
use in parking lots, building facades, and
general area lighting.
For warranty coverage, please register at www.ledvanceUS.com
Please Read All Instructions Before Attempting Installation
• TO PREVENT PERSONAL INJURY OR PRODUCT DAMAGE ONLY LICENSED ELECTRICIANS SHOULD PROVIDE ALL
INSTALLATION SERVICES.
• TO AVOID ELECTRIC SHOCK OR COMPONENT DAMAGE DISCONNECT POWER BEFORE ATTEMPTING INSTALLATION OR
SERVICING.
• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE (NEC) AND ALL
APPLICABLE FEDERAL, STATE AND LOCAL ELECTRIC CODES AND SAFETY STANDARDS.
• USE ONLY UL (OR OTHER NTRL) APPROVED WIRE FOR INPUT/OUTPUT CONNECTIONS. MINIMUM SIZE 18 AWG OR 14
AWG FOR CONTINUOUS RUNS.
• DO NOT INSTALL IN A HAZARDOUS ATMOSPHERE, EXCEPT WHERE THE AMBIENT TEMPERATURE DOES NOT EXCEED
THE RATED OPERATING TEMPERATURE OF THE FIXTURE.
• USE CAUTION WHEN HANDLING THIS PRODUCT DURING OR AFTER OPERATION AS IT MAY BECOME HOT AND CAUSE
BURNS. DISCONNECT PRODUCT AND ALLOW COOLING PRIOR TO SERVICING.
• ANY ALTERATION OR MODIFICATION OF THIS PRODUCT IS EXPRESSLY FORBIDDEN AS IT MAY CAUSE SERIOUS
PERSONAL INJURY, DEATH, PROPERTY DAMAGE AND/OR PRODUCT MALFUNCTION.
• TO PREVENT PRODUCT MALFUNCTION AND / OR ELECTRICAL SHOCK THIS PRODUCT MUST BE PROPERLY
GROUNDED.
• CAUTION - RISK OF FIRE
• THIS LUMINAIRE IS DESIGNED TO OPERATE IN AMBIENT TEMPERATURES RANGING FROM -40°F TO +122°F (-40°C TO
+50°C).
4177724
WARNING

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Area Light 5A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ledvance Area Light 5A

  • Page 1 HID luminaires, offering up to 78% in energy savings. Ideal in place of traditional luminaires, or in new installations, the Area Light 5A series are wattage/lumen selectable for use in parking lots, building facades, and general area lighting.
  • Page 2: Safety Precautions

    Safety Precautions: IMPORTANT: READ CAREFULLY BEFORE INSTALLING THE FIXTURE. RETAIN FOR FUTURE REFERENCE. GENERAL: Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the attention of the delivery carrier. Wattage Selection Switch -Use a tool (screwdriver) to open the knockout on in the front of the luminaire and select the desired wattage. Then use a tool (screwdriver) to replace and tighten knockout.
  • Page 3: Universal Mounting Bracket

    Universal Mounting Bracket: *Comes fitted with slip fitter. Square and round pole mount in the box, Pole Drill Pattern: 4177724...
  • Page 4 Installation: Slip fitter Mount 2. Loosen the four bolts on the bracket, connect the wires 1. Remove any spare parts from the bracket. correctly, and pull the wires into the pole. Place the bracket into the pole and lock the four bolts. Note: Adjustable angle range is 0-90°...
  • Page 5 Installation: Round Pole Mount Attach the pole mount bracket/installation bar 2. Thread the wires into the round pole, attach to the slip fitter and screw down bolts until fully the bracket to the round pole with bolts, connect tightened. the wires properly and close the junction box once wiring is complete.
  • Page 6: Wiring Diagram

    Installation: Motion Sensor Unscrew the 1/2 plug; install the sensor in the socket. Wiring Diagram 4177724...
  • Page 7 Luminaires LEDVANCE Luminaire pour grandes surfaces à puissance sélectionnable et de classe valeur Luminaire de grandes surfaces 5A Les luminaires LEDVANCE pour grandes surfaces à puissance sélectionnable et de classe valeur 5A sont des alternatives DEL écologiquement responsables par rapport aux luminaires à...
  • Page 8: Mesures De Sécurité

    Mesures de sécurité : IMPORTANT : VEUILLEZ LIRE ATTENTIVEMENT LES DIRECTIVES D’INSTALLATION AVANT L’INSTALLATION DE CE LUMINAIRE. GARDER CES DIRECTIVES POUR RÉFÉRENCE FUTURE. GÉNÉRAL : Lors de la réception de l'appareil, vérifiez soigneusement qu'il n'y a pas de dommages causés durant le transport et si des dommages sont constatés aviser le transporteur.
  • Page 9 Support de montage universel : *Inclus avec le raccord lisse. Montage pour mât rond et carré compris dans la boîte Gabarit de perçage des mâts : 4177724...
  • Page 10 Installation : montage sur raccord lisse Écrou ajustable Support AM Luminaire Écrou de verrouillage Câble Support Support 2. Desserrer les quatre écrous du support, connecter les 1. Retirer toutes les pièces de rechange du support. fils correctement et tirer les fils dans le poteau. Placer le support dans le mât et rattacher les quatre écrous.
  • Page 11 Installation : montage sur mât rond Support A et D Capuchon en caoutchouc Barre d’installation Adaptateur de mât Mât rond 2. Insérer les câbles dans le mât rond, y fixer le 1. . Fixer le support de montage/barre support à l'aide des écrous, connecter les d’installation du mât sur le raccord lisse et câbles correctement et fermer la boîte de visser les écrous jusqu'à...
  • Page 12: Schéma De Câblage

    Installation : détecteur de mouvement Fiche 1/2 Détecteur à infrarouge passif Détecteur de mouvement Dévisser la fiche 1/2 ; installer le détecteur dans la douille. Schéma de câblage LUMINAIRE Câble d'alimentation ALIMENTATION ALIM. (noir/brun) PILOTE DEL NEUTRE (blanc/bleu) GRAD. – (rose) MISE-À-LA-TERRE GRAD.

Table of Contents