Table of Contents
Advertisement
en Installation instructions
Insert the wall plugs flush with the wall.
9.
Installing the appliance bracket
Align the appliance bracket for the extractor hood
1.
and screw it on hand-tight.
Use a spirit level to align the appliance bracket hori-
2.
zontally and screw it firmly in place.
Installing the appliance
Remove the grease filters.
1.
To avoid causing damage, do not bend the grease
filters.
Attach the appliance.
2.
Screw the knurled nuts onto the safety screw by
3.
hand and tighten them hand-tight.
18
Position the front filter holder diagonally upwards
4.
and insert it into the tabs. Push the lower filter
holder in so that it audibly engages.
Insert the lower filter holder so that it audibly en-
5.
gages.
Insert the glass support in the opening and fold it
6.
down as far as it will go.
Align the glass panel at an angle of 90° to the ap-
7.
pliance.
Advertisement
Table of Contents
